Open a serial console
Connect to your DUT's UART console with mimick connect.
Control GPIO and relays
Read and set your DUT's GPIO pins and relay channels with the mimick CLI.
Reset a board with DTR and RTS
Drive a serial port's DTR and RTS lines, send a break, and change its line settings with the mimick CLI.
Send and read serial data
Write to a serial port, read from it, or send a command and capture the reply with the mimick CLI.
Use a remote UART with a local tool
Expose a bench UART as a local RFC 2217 serial port, so pyserial, esptool, stm32flash, and other serial tools can use it as if it were attached to your computer.